[SOLVED] "Wifi panel" and "mouse and keyboard" not work

Hi, i'm new in the world of linux. I have an old pc and so I tried zorin lite 32 bit because its look is identical to that of XP.
Now i have 2 questions:
1- when i go on "preference"-->"keyboard and mouse" and try to set the speed more slow, this window closes unexpectedly. What can i do?
2- after logging in I get this window about the wifi:

although I put the first option, that it would enable the automatic insertion of the password when I restart the notebook, the window continues to appear. Why?

Hi,

when the message pops up after a start, close it and go to the network icon on the taskbar, click on "Edit Connections" and then go to "Wireless" > (Highlight the connection you wish to edit) then "Edit", you must click on "Connect Automatically" and for "All Users", you will be asked for your password.

Regards Wolfman

thanks a lot.
...and for the first question? Why the window "mouse and keyboard" close unexpectedly?

not work!

khammed wrote:1- when i go on "preference"-->"keyboard and mouse" and try to set the speed more slow, this window closes unexpectedly. What can i do?

Open a terminal and write

Code:

sudo dmesg -c

hit enter (give password if asked).

Do not close the terminal.

Then goto to preferences->keyboard and mouse and try to set the speed more slow so as the window to close unexpectidely.


Then go again to terminal and wirte

Code:

dmesg

and post here the results so as to see if we can trace what is wrong.

After the comand "dmesg" this is all:

Code:

[  144.994618] lxinput[1526]: segfault at 0 ip 00d82300 sp bf8bca20 error 4 in libX11.so.6.3.0[d4b000+116000]

I think that there must be something wrong with the drivers of your graphics card! (libx11 error)

Post the results of

Code:

lspci

to see what is your graphics card and also please advise if you are using the recomended driver of "additional drivers" (if any).

I haven't installed any driver for my graphic card.
The comand that you have request show this:

Code:

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G98M [GeForce G 103M] (rev a1)
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

Go to system>administration>additional drivers and see if there is any proprietary driver recomended for your graphics card.

I have actived the driver but..."This driver is activated but not currently in use"

====================================================
Moreover if i try to delete something from the desktop it freezes

Code:

[attachment=0]Desktop2.png[/attachment]

Ok.
De-activate the recomended driver.

With the recomended driver de-activated, do you have 3D effects from compiz? (cube, windows to break in pieces when closed etc?)

no i haven't any compiz option enabled

Ok try this.

As I said, de-activate the recomended driver from additional drivers.

Then go to start-up applications (system>preferences>startup applications) and +add a new entry.

Name: Compiz
Command:

Code:

compiz --replace

Comment: Compiz


Reboot and let me know if there was any improvement. Check also to see if after the reboot you have compiz effects.

I have disabled the "raccomanded driver", but I saw that haven't these files
system>preferences>startup applications
I see only an "autostart" in the preferences>session settings and I can't add a new entry.
This is all:
[*]
[*]

.....

I forgot that you have the lite version of zorin...

You can try to run this command in terminal, and see if you get any improvement.

Yuppie
I removed lxinput (0.3.0) and installed the 0.3.1 version and now it works!
Wonderful!

sure, thank you very much for your help.
see you next time