3dsp wilress

hi.
3dsp drive installed on my notebook and it has not run.
as the new kernel is 3.11 of 8 zorin like your help to put the wireless to work.

thank you

Hi. I have never tried it. But I found this and you can try: https://github.com/reyiyo/3dsp

did exactly this process.
it installs everything right.
after that I run the uwb 3dsp
and then run the 3dsp wifi radar.

uwb 3dsp appear on the execution of processes.
the 3dsp wifi radar when you click it it asks me password I provide and does not perform.

how could solve this problem. because I had to put a router as a repeater in my room to run the cable internet not to stay without internet. (kkkk)

Thank you.

Can you please post back the terminal results of:

lspci
lsusb

root@PauloEduardo:/home/pauloeduardo/3dsp# sudo uwb && 3dsp-wifi-radar
NO! pid:32651 find pid:32224 lock the file /usr/local/3DSP/usb/wbusb.conf
read file: /etc/wifi-radar/wifi-radar.conf
Initialzers: domian is US
wifi-radar has being running!
3DSP WiFi Radar is already running!

pauloeduardo@PauloEduardo:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

pauloeduardo@PauloEduardo:~$ lsusb
Bus 002 Device 003: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter
Bus 002 Device 012: ID 04e8:6124 Samsung Electronics Co., Ltd
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@PauloEduardo:/home/pauloeduardo/3dsp# sudo uwb && 3dsp-wifi-radar
NO! pid:32651 find pid:32224 lock the file /usr/local/3DSP/usb/wbusb.conf
read file: /etc/wifi-radar/wifi-radar.conf
Initialzers: domian is US
wifi-radar has being running!
3DSP WiFi Radar is already running!

pauloeduardo@PauloEduardo:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

pauloeduardo@PauloEduardo:~$ lsusb
Bus 002 Device 003: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter
Bus 002 Device 012: ID 04e8:6124 Samsung Electronics Co., Ltd
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

anyone can help ?

Hi dudus, please be patient, we are all volunteers (moderators). madvinegar is the man to sort you out!

ok let's consider that I am new to linux as it has more than 10 years since I moved to linux.
I'm relearning things and chose this platform to install the likeness to windows because I'll install linux for my wife and my father.

hehe.

Gradually we relearning things.

thank you

Help !!!!

How is your Portugese...???
Use google translate (if you open the link with google chrome you can translate the whole page to your preffered language).

http://eritonb.blogspot.gr/2012/05/3dsp ... ernel.html

It is the best I can find as I have never ever used or tried 3dsp adaptors.

help...

dudus wrote:help...

See madvinegars response to you!

Hi
I had already tested this tutorial.
No avail.
I installed mint for the purpose of testing I installed mint 16 and even install the drive load but not run.
So I will try the previous kernel.

Unfortunately I can not move on to other kernel does not support the driver 3dsp where the company has more or website.

sad.

Thanks for trying to help.

I decided to reinstall the system and redo procedures.

I got this error.
what can I do?

NO! pid:19246 find pid:2673 lock the file /usr/local/3DSP/usb/wbusb.conf
Gtk-Message: Failed to load module "libunity-gtk-module.so"
read file: /etc/wifi-radar/wifi-radar.conf
Initialzers: domian is US
Authentication for running 3dsp-wifi-radar failed!

I have already installed all dependencies.

Now just find this error.

NO! pid:384 find pid:2673 lock the file /usr/local/3DSP/usb/wbusb.conf
3dsp-wifi-radar.conf: comando não encontrad

Hi dudus, I am afraid you will have to wait for madvinegar to respond to this issue - all moderators are volunteers so bear with us! I will remove [CLOSED] from this thread as you have brought it to life again!

ok

As I have said, this card is very old and used to work with kernel 2.6
Dudus has kernel 3.11 (Zorin8) and there are not supporting drivers for this.

A fellow member in the greek ubuntu forum had the same forum and we also tried to get it working via ndiswrapper without any success (we have spent 17 forum pages...).

In case you would like to try as well (and you have the CD with the accompaning XP drivers) you can have a look at my guide here:
viewtopic.php?f=6&t=5008&p=23910&hilit=ndiswrapper#p23910

hi .
unfortunately this does not work.
I'm testing all forms to see if I can get some results .

The problem with this wireless card is that besides being pessima and unsupported in windows it loads the drive then loads the wireles for different applications .

about not having support for newer kernel is a fault of the developers of distributions .

a big plus for me was just the linux kernel always coupled to the drivers of disposivos already tested .

This discourages a lot.

'm Pindurado this pc to days trying to solve just this problem .

in mint 16 install the drive he made ​​the correct Chada . but for some reason did not carry .

zorin in it loads in the uwb system processes but do not apply the taskbar where the clock is .
hindering the process of trying to load the driver .

wifi rada the 3dsp not open .
but the wifi rada system opens without detecting the driver.

My hope was to throw it somehow since it lists in the lsusb wireles drive with another drive without the original.

I would not give up and try all possible alternatives to get to work and post a status for those who have this xxxx wireless card .

Hi dudus, I think your last comment is nearer the mark! It is hardware manufacturers that are the issue here, not GNU/Linux. Don't forget a lot of awesome work has been done by the devs of both ndiswrapper and madwifi - projects in their own right - but if the hardware and software are solely designed for Windows users, who is really to blame?

Hi
hehe ...
I agree with you in part.
Really manufacturers are the biggest culprits. With this crude attempt ever previlegiar windows.
And with this attempt to mislead the consumer by making postings hardware married with software sales.
It really is a win GNU / Linux on the porch of this today.
But I disagree when you see a driver that works on an older version and does not work in a newer version. To me this thing windows.

I'm not advanced in linux'm just a beginner.
But firmly believe that we can just go to have a solution in place.
Thank you.

If they have any more idea please do not hesitate to try to help.

There is a long thread here - but I don't think you will get any further as madvinegar knows his stuff:

http://ubuntuforums.org/showthread.php?t=1234213

I wish I could get a 3dsp card in my hands to start testing how to get it to work. And if in the end I managed to do it, I would write a detailed guide.

If your desire. certainly is mine.
I can provide access to my pc. may utulizar and test how much you want.

would be possible to do this way?

Thank you.

Hi dudus, it is not going to work period!

I know it is something complicated to do but if you want you can add me at g-mail whenever you want just let me know.

If I'm not there leave a msg saying that I'm not there and can mecher will.

I am willing to do anything to solve all the problems! helping the community to my person.

All known issues I'm reporting in the community.

Thank you.

It is very difficult for me to work remotely. I need to use the laptop 100%, restarting it, maybe even format it, installing new kernels etc. Even so, I am not sure 100% that I can get it to work as I have never used a 3dsp card before. I will try to find a cheap used one on ebay.

One last question.
Have your tried installing Zorin 6.0 (not 6.2, or 6.3 or 6.4) and then following the guide in the link I provided? http://eritonb.blogspot.gr/2012/05/3dsp ... ernel.html
The guide in the weblink says specifically that they got the 3dsp working on ubuntu 12.04 (and they mean with kernel 3.2 which is the LTS kernel).
Would you like to try that as well?

Zorin 6.0 32bit: http://download.cnet.com/Zorin-OS-32-bi ... 54816.html
Zorin 6.0 64bit: http://download.cnet.com/Zorin-OS-64-bi ... 54817.html

yes I test.
Although I wanted the updated kernel kkkk
Proveitando the leaves.
with outdated kernel I can install any program that has today upgraded to linux?

The kernel is not outdated. It is the Long term support kernel (very very steady) and will be supported till 2017.

Hi
Follow the process.
installed zorin 6.0 64. I followed the manual link "http://eritonb.blogspot.com.br/2012/05/3dsp-bluew2310-u-no-ubuntu-1204-kernel.html"
after installation. I did the command to launch
sudo uwb && 3dsp-wifi-radar

segue o que aconteceu.

paulo@paulo-pc:~/3dsp$ sudo uwb && 3dsp-wifi-radar
pid: 8029 process lock the file successfully!

Name: notify-osd is notify-osd
pid: 8029 process lock the file successfully!
AntennaFlag = 0

Start rfcomm/pand server......
Waiting for connection on channel 1
sudo: pand: command not found
Add SDP services......
Serial Port service registered
make file .asoundrc in root directory
make file .asoundrc file in user home directory

(uwb:8029): GLib-GObject-WARNING **: invalid cast from `GtkCheckMenuItem' to `<invalid>
-----------------------------------------------------------------------------------------------------------------------------------------

Bluetooth was launched.
but the wireles is still not released.

hi.

Exactly follow everything that is happening.
After installation I rebooted and showed me the following image.



after he asks authentication for wifi 3dsp put and it appears



and does not carry 3dsp wifi radar screen.

after it installed wifi rada through the Program Manager and performed the same. he apreceu all networks.
But gets stopped trying adiquirir IP Address (DHCP)



now think it lacks little to succeed
but need the help of lords.

thank you

You are soooooo close. Have you set ipv4 and ipv6 settings to automatic?

Can you also try to connect using network manager? (and not widi radar)

Another issue could be your MTU settings - here in the UK we are limited to 1432 - automatic = 1500!

If you use OpenDNS on your router, change DHCP (Automatic) to DHCP (addresses only) and add the DNS Servers in the DNS field as:

208.67.222.222,208.67.220.220

Remember to checkmark 'Connect Automatically' and 'All users' and 'Save'!

I believe you're giving some conflico with the driver that the kernel install.
how could I remove the wireless driver listed in lsusb?

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 13fe:4100 Kingston Technology Company Inc.
Bus 002 Device 004: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter

can you give me the results of:

sudo lshw -c network
lsmod

sudo lshw -c network
*-network
descrição: Ethernet interface
produto: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
fabricante: Realtek Semiconductor Co., Ltd.
ID físico: 0
informações do barramento: pci@0000:02:00.0
nome lógico: eth0
versão: 02
serial: 00:e0:4e:00:6b:e3
tamanho: 100Mbit/s
capacidade: 100Mbit/s
largura: 64 bits
clock: 33MHz
capacidades: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuração: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.1.207 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
recursos: irq:40 porta de E/S:2000(tamanho=256) memória:f0800000-f0800fff memória:f0810000-f081ffff memória:f0820000-f083ffff
*-network DESABILITADO
descrição: Interface sem fio
ID físico: 4
nome lógico: twifiu0
serial: 00:21:c5:18:65:81
capacidades: ethernet physical wireless
configuração: broadcast=yes multicast=yes wireless=802.11 g


lsmod
Module Size Used by
3dspusbbt 32549 1
3dspusbbtpriv 643144 1 3dspusbbt
3dspusbwlan 45401 0
3dspusbwlanpriv 334735 1 3dspusbwlan
3dspusbbus 17947 2 3dspusbbt,3dspusbwlan
bnep 18281 2
rfcomm 47604 5
bluetooth 180104 13 3dspusbbt,bnep,rfcomm
parport_pc 32866 0
ppdev 17113 0
binfmt_misc 17540 1
snd_hda_codec_hdmi 32474 1
snd_hda_codec_realtek 223867 1
snd_hda_intel 33773 5
snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13668 1 snd_hda_codec
snd_pcm 97188 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
joydev 17693 0
snd_seq_midi 13324 0
uvcvideo 72627 0
videodev 98259 1 uvcvideo
snd_rawmidi 30748 1 snd_seq_midi
v4l2_compat_ioctl32 17128 1 videodev
snd_seq_midi_event 14899 1 snd_seq_midi
snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event
snd_timer 29990 2 snd_pcm,snd_seq
snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 78855 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
dm_multipath 23230 0
mac_hid 13253 0
soundcore 15091 1 snd
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
psmouse 87692 0
topstar_laptop 12832 0
serio_raw 13211 0
sparse_keymap 13890 1 topstar_laptop
intel_ips 18089 0
lp 17799 0
parport 46562 3 parport_pc,ppdev,lp
dm_raid45 78155 0
xor 12894 1 dm_raid45
dm_mirror 22203 0
dm_region_hash 20918 1 dm_mirror
dm_log 18564 3 dm_raid45,dm_mirror,dm_region_hash
btrfs 652957 0
zlib_deflate 27139 1 btrfs
libcrc32c 12644 1 btrfs
i915 468764 8
drm_kms_helper 46978 1 i915
r8169 62099 0
drm 242038 4 i915,drm_kms_helper
i2c_algo_bit 13423 1 i915
video 19596 1 i915
zram 18642 1

This is the problem.

-network DESABILITADO

The weird thing is that the fmodule is loaded. You can see that in lsmod.

What happens if you issue the command:

Code:

sudo modprobe 3dspusbwlan

If you don't get any result check if you get the wireless networks.
If you get an error message, post it here.

paulo@paulo-pc:~$ sudo modprobe 3dspusbwlan
[sudo] password for paulo:
FATAL: Module 3dspusbwlan not found.

Just found out today the following (updated drivers for 3dsp)

https://github.com/Alamot/3dsp