This is a static archive of the old Zorin Forum.
The information below may be outdated. Visit the new Zorin Forum
here ›If you have registered on the old forum, you will need to create an account on the new forum.
jowilker
Tue Oct 20, 2015 5:21:32 pm
Hi Guys, my neighbors computer died so I loaded 9 64 on a hard drive that I had and got her up and going again. She has a Brother MFC-J410w printer that shows in the printer box with the green check but will not print. I took a windows box over and hooked it up and printed a test page, so the printer is good.
I need to know exactly what to put into the terminal to get it going.
John
Swarfendor437
Thu Oct 22, 2015 11:58:46 am
Hi, Please read this advice from Wolfman's Post install guide at top of forum:
"Brother Printers:
Open Synaptic package manager and type "brother" in search and mark all the packages that you can see and install them:
then open System Settings and add your printer in System Settings > Hardware > Printers > Add."
[*Footnote: Synaptic can be found just by entering it into the Windows 7 menu type search bar.]