Windows 7 not booting

Windows 7 not booting

Postby Ric » Wed Oct 26, 2011 1:05 am

Hi,

Sorry, I just opened up a thread asking about this. The thread is not public yet but I wanted to add the boot_info_script information for your consideration. Thanks again,

Here it is:

Code: Select all
oot Info Script 0.60 from 17 May 2011


============================= Boot Info Summary:
===============================

=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at
sector 1 of
the same hard drive for core.img. core.img is at this location and
looks
for (,msdos5)/boot/grub on this drive.

sda1:
__________________________________________________________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD

sda2:
__________________________________________________________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe

sda3:
__________________________________________________________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5:
__________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

============================ Drive/Partition Info:
=============================

Drive: sda
_____________________________________________________________________

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 2,048 206,847 204,800 7 NTFS /
exFAT / HPFS
/dev/sda2 206,848 527,770,568 527,563,721 7 NTFS /
exFAT / HPFS
/dev/sda3 527,771,646 625,141,759 97,370,114 5 Extended
/dev/sda5 527,771,648 625,141,759 97,370,112 83 Linux


"blkid" output:
________________________________________________________________

Device UUID TYPE LABEL

/dev/ramzswap0 swap
/dev/sda1 3818C5C918C5867A ntfs
System Reserved
/dev/sda2 F2ACCE79ACCE383D ntfs
/dev/sda5 11560ed9-3c58-40ab-9f0e-a93fda67830e ext4

================================ Mount points:
=================================

Device Mount_Point Type Options

/dev/sda5 / ext4
(rw,errors=remount-ro,commit=0)


=========================== sda5/boot/grub/grub.cfg:
===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then
save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root 11560ed9-3c58-40ab-9f0e-a93fda67830e
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root 11560ed9-3c58-40ab-9f0e-a93fda67830e
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 8,50,90; then
clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-12-generic' --class ubuntu --class
gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
linux /boot/vmlinuz-2.6.38-12-generic
root=UUID=11560ed9-3c58-40ab-9f0e-a93fda67830e ro quiet splash
vt.handoff=7
initrd /boot/initrd.img-2.6.38-12-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-12-generic (recovery mode)' --class
ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
echo 'Loading Linux 2.6.38-12-generic ...'
linux /boot/vmlinuz-2.6.38-12-generic
root=UUID=11560ed9-3c58-40ab-9f0e-a93fda67830e ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-12-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class
gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
linux /boot/vmlinuz-2.6.38-11-generic
root=UUID=11560ed9-3c58-40ab-9f0e-a93fda67830e ro quiet splash
vt.handoff=7
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic (recovery mode)' --class
ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
echo 'Loading Linux 2.6.38-11-generic ...'
linux /boot/vmlinuz-2.6.38-11-generic
root=UUID=11560ed9-3c58-40ab-9f0e-a93fda67830e ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-10-generic' --class ubuntu --class
gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
linux /boot/vmlinuz-2.6.38-10-generic
root=UUID=11560ed9-3c58-40ab-9f0e-a93fda67830e ro quiet splash
vt.handoff=7
initrd /boot/initrd.img-2.6.38-10-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-10-generic (recovery mode)' --class
ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
echo 'Loading Linux 2.6.38-10-generic ...'
linux /boot/vmlinuz-2.6.38-10-generic
root=UUID=11560ed9-3c58-40ab-9f0e-a93fda67830e ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-10-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class
gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
linux /boot/vmlinuz-2.6.38-8-generic
root=UUID=11560ed9-3c58-40ab-9f0e-a93fda67830e ro quiet splash
vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class
ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic
root=UUID=11560ed9-3c58-40ab-9f0e-a93fda67830e ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos5)'
search --no-floppy --fs-uuid --set=root
11560ed9-3c58-40ab-9f0e-a93fda67830e
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 3818C5C918C5867A
chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply
type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab:
================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=11560ed9-3c58-40ab-9f0e-a93fda67830e / ext4
errors=remount-ro 0 1
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub:
====================

GiB - GB File
Fragment(s)

263.870876312 = 283.329196032
boot/grub/core.img 1
263.870712280 = 283.329019904
boot/grub/grub.cfg 1
254.461307526 = 273.225748480
boot/initrd.img-2.6.38-10-generic 1
257.422245026 = 276.405030912
boot/initrd.img-2.6.38-11-generic 1
257.425548553 = 276.408578048
boot/initrd.img-2.6.38-12-generic 3
251.828487396 = 270.398779392
boot/initrd.img-2.6.38-8-generic 1
263.797248840 = 283.250139136
boot/vmlinuz-2.6.38-10-generic 1
255.516914368 = 274.359197696
boot/vmlinuz-2.6.38-11-generic 1
258.059883118 = 277.089689600
boot/vmlinuz-2.6.38-12-generic 2
263.801464081 = 283.254665216
boot/vmlinuz-2.6.38-8-generic 1
257.425548553 = 276.408578048
initrd.img 3
257.422245026 = 276.405030912
initrd.img.old 1
258.059883118 = 277.089689600
vmlinuz 2
255.516914368 = 274.359197696
vmlinuz.old 1

=============================== StdErr Messages:
===============================

unlzma: Decoder error
User avatar
Ric
 
Posts: 2
Joined: Tue Oct 25, 2011 11:30 pm

Return to Help and Support

Who is online

Users browsing this forum: No registered users and 6 guests