hadisch
Sun Oct 13, 2019 8:00:36 am
Hello everybody,
I jump into the console with ctrl-alt-fn. When I log out of the console, I end up in the graphical login screen and my computer is completely frozen.
This behavior is reproducible at any time. So I can only switch to the console, though
I accept a subsequent freeze of my computer.
Is this problem known or does it only occur with my hardware?
Any suggestions?
Best regards,
hadisch
I jump into the console with ctrl-alt-fn. When I log out of the console, I end up in the graphical login screen and my computer is completely frozen.
This behavior is reproducible at any time. So I can only switch to the console, though
I accept a subsequent freeze of my computer.
Is this problem known or does it only occur with my hardware?
Any suggestions?
Best regards,
hadisch
- Code:
System: Host: rocinante Kernel: 5.0.0-31-generic x86_64 bits: 64 Desktop: Gnome 3.30.2 Distro: Zorin OS 15
Machine: Device: desktop System: Hewlett-Packard product: HP Z400 Workstation serial: N/A
Mobo: Hewlett-Packard model: 0B4Ch v: D serial: N/A
BIOS: Hewlett-Packard v: 786G3 v03.61 date: 03/05/2018
CPU: Quad core Intel Xeon W3550 (-MT-MCP-) cache: 8192 KB
clock speeds: max: 3060 MHz 1: 1604 MHz 2: 1603 MHz 3: 1616 MHz 4: 1615 MHz 5: 1599 MHz 6: 1599 MHz
7: 1602 MHz 8: 1600 MHz
Graphics: Card: NVIDIA GF100GL [Quadro 4000]
Display Server: x11 (X.Org 1.20.4 ) drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
Resolution: 1920x1080@60.00hz
OpenGL: renderer: Quadro 4000/PCIe/SSE2 version: 4.6.0 NVIDIA 390.129
Audio: Card-1 NVIDIA GF100 High Definition Audio Controller driver: snd_hda_intel
Card-2 Intel 82801JI (ICH10 Family) HD Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k5.0.0-31-generic
Network: Card: Broadcom and subsidiaries NetXtreme BCM5764M Gigabit Ethernet PCIe driver: tg3
IF: enp1s0 state: up speed: 1000 Mbps duplex: full mac: 2c:27:d7:35:1e:58
Drives: HDD Total Size: 1032.2GB (46.0% used)
ID-1: /dev/sda model: TS32GSSD370S size: 32.0GB
ID-2: /dev/sdb model: WDC_WD10EZEX size: 1000.2GB
Partition: ID-1: / size: 30G used: 14G (51%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 865G used: 418G (51%) fs: ext4 dev: /dev/sdb3
ID-3: swap-1 size: 12.88GB used: 0.00GB (0%) fs: swap dev: /dev/sdb1
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 43.0C mobo: N/A gpu: 56C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 302 Uptime: 5 min Memory: 1465.2/11987.5MB Client: Shell (bash) inxi: 2.3.56