This is a static archive of the old Zorin Forum.

The information below may be outdated. Visit the new Zorin Forum here ›

If you have registered on the old forum, you will need to create an account on the new forum.

[SOLVED] System freezes after reopening the lid

gianmarcogg03

Fri Jan 24, 2020 9:20:05 pm

I have Zorin OS Lite 15 on my laptop and I have set that when I close the lid the screen turns off, but when I open it the open windows show again and the cursor seems to work but I can't actually click on anything or give any keyboard input, then the cursor disappears forcing me to shut down the computer by holding the power button. How do I fix this?

Swarfendor437

Fri Jan 24, 2020 9:26:29 pm

Hi see this thread - the last post solved the issue:

viewtopic.php?f=5&t=15295#p68825

gianmarcogg03

Fri Jan 24, 2020 9:32:15 pm

But I don't want it to suspend...

Swarfendor437

Sat Jan 25, 2020 12:48:52 am

OK, Go into Menu | Settings | Power Manager.

1.
Change to Shutdown.jpg
- Change Power Button Settings from Suspend to Shutdown.


2.
System Power Saving.jpg
- the System Sleep Mode cannot be changed but the timing can - increase it so that suspend does not take place unitl over 5 hours - move that slider to far right and uncheck "Lock screen when going to sleep"

3.
Display Power Management.jpg
- Display Power Management - change all available settings to never, then turn off.

4.
Turn off activate screensaver when idle.jpg
- Turn off "Activate Screensaver when idle."

5.
Disable lock screen after turning off Lock Screen with Screensaver.jpg
- Disable Lock Screen - AFTER turning off "Lock Screen with Screensaver."

Keep us posted

My only other comment is that your battery life will be shortened considerably. ;) :D

gianmarcogg03

Sat Jan 25, 2020 11:53:19 am

It worked, thank you!

Swarfendor437

Sat Jan 25, 2020 12:49:11 pm

Glad you are sorted. Have marked as [SOLVED]. ;) :D